Swivel head with spindle lock and 24 position indexing, large capacity, and solid cast iron construction makes this lathe second to none.

• Headstock is one solid casting which not only increases strength, but also provides greater vibration dampening properties and aids in increased overall performance
• Micro chip enables faster processing and the ability to upgrade firm ware which will allow for potential software upgrades
• Pre-program up to 5 speeds into the computer so that they are selectable at the push of a button, and easily modified using the up/down buttons
• Torque is in the up to 1000 RPM range (compared with DVR 3000 spec's) due to a unique direct magnetic attraction principle where torque is not dependant on speed
• 1-3/4 HP, 115v (2HP 220v) motor is direct drive, using one-piece rotors and no pulleys or belts, which results in the smoothest turning platform available
• No pulleys or belts are needed, so the energy transfer is 100% to the spindle
• Ability to use a 15 Amp, 115V circuit; motor runs efficiently on voltages that fry standard wire wound motors, within a range of 90 to 250V
• The laminated solid steel rotor eliminates rotor wear
• No belts or pulleys, so lathe durability is greater, because the only wear points are the spindle bearings
• Enhanced safety because the motor cannot restart on it's own after a power interruption
• Circuitry is sensitive enough to read and adjust to abnormal cutting conditions, which bring on a power cut, in less than a single rotation of the spindle
• Speed is variable, in 5 RPM steps, from 100 to 3500 rpm through touch pad electronic circuitry

Specifications:

• Precisely machined cast iron bed extensions allow you to increase bed length by 21" per segment and use alignment pins to ensure overall bed accuracy as you add extensions
• Swivel head features a unique detent lock for absolutely perfect alignment with the bed and can be locked in any position through 360° for added turning flexibility
• Includes combined headstock/bed unit and one bed extension for 24" between centers and up to 16" swing over the bed
• 1-1/4" x 8 TPI spindle, 3" faceplate, 12" tool rest, #2 MT live tail center, and #2 MT drive center
• Full five year limited warranty

Shipping weight is 200 lb., shipped by common carrier at our regular shipping and handling rate plus $55.00 for excess weight. The fee will be applied on the shopping cart page. Freight items will be brought to the back of the delivery truck for you to unload. If you want delivery with a liftgate truck or wish to pick up the item yourself at the terminal, contact our Customer Service Dept. and they will work out the details and contact you with options.


California Residents: Click here for Proposition 65 information.