Add the Mast-R-Lift to your router table and take your fixed base router to another level, literally! Bit changes are convenient because the collet is accessible above the table. The Mast-R-Lift was designed for the most popular router motor on the market the Porter-Cable 7518 (3.5" diameter motors will fit with an appropriate adapter, sold separately). Each turn of the crank precisely raises the bit 1/16". The calibrated gauge makes it easy to make incremental adjustments as fine as 1/512" (less than 0.002").

• The Mast-R-Lift is constructed of the highest quality components including a plate machined from 1" aluminum with a 3-1/2" opening that accepts the included phenolic insert to close the hole to 2" for smaller bits.
• Unique leveling bars are located at each corner to bring the plate flush with your router table surface.
• The medium plate is sized for 9-1/4" x 11-3/4" openings found on JessEm, Woodhaven, Woodpeckers, and many other router tables.
• The small plate is sized for 8-1/4" x 11-3/4" openings found on Bench Dog router tables.
• Includes an insert wrench, starting pin, and detailed instructions.
• Router motor is not included.

Mast-R-Lift Adapters allow you to use your 3.5" diameter motor (Porter-Cable 690, DeWalt 610, Bosch 1617, 1618, 1617EVS and 1618EVS) in the Mast-R-Lift clamp block.

PC 7518 3-1/4 HP Motor. Spare the expense of the base and purchase only the motor of a Porter Cable 7518 Router. Includes 1/2" collet and wrenches.


California Residents: Click here for Proposition 65 information.