Designed for smaller lathes, this new chuck from Oneway Manufacturing is loaded with features. Only 3-1/2" in diameter and weighing 3.4 lbs., it features one-handed single key tightening, it's self-centering, and its patented profile jaws provide maximum holding power. Both the scroll and base jaws are hardened for long life and smooth operation while the body is nickel plated to resist rust and wear.

Comes with:

• #2 Jaw set which will grip a spigot from 1-5/8" to 2-7/8" and expand in a dovetailed recess sized from 2" to 3-3/8"
• Screw center
• Operating key
• T handle hex wrench
• Removeable threaded adapter
• Instruction booklet.

#1 Spigot Jaws for holding smaller projects. Will grip round stock from 1/4" to 1-3/4" or expand into a dovetailed recess from 1" to 2-1/2".

#3 Jaws for bowls, vessels and platters. These jaws will hold round stock from 2-7/8" to 4-3/8", or expand into a dovetailed recess from 3-3/8" to 4-7/8".

Mini Jumbo Jaws are designed to re-chuck bowls and plates for complete “bottom finishing”. The 8 rubber grippers cushion and hold your work piece (up to 9-7/8" dia.) during light finish turning and sanding operations.


California Residents: Click here for Proposition 65 information.