|
|
JET Xacta Saw 3HP, 1 PH, Left Tilt, With 50" Xacta Fence, Table and Legs, Model JTAS-10XL50-1
- EXCLUSIVE 50" commercial XACTA® Fence II with T-square design
- Cast iron wings to increase work surface and support area
- Three matched V-belts deliver full power to the blade
- Rail-mounted magnetic switch is easy to reach and provides overload protection
- One-piece closed stand channels dust through a 4" port for fast, clean dust collection
- Hinged motor cover on cabinet gives quick access to the motor and belts
- Heavy-duty chrome plated handwheels contribute to smooth trunnion/arbor movement
- Built-in 4" port for dust collection
- See-through blade guard with splitter and anti-kickback pawls helps protect operator while giving a clear view of the material being cut
- Precision ground high luster cast iron table tops with front edge bevel for hassle-free workpiece positioning
- Miter gauge with adjustable positive stops for accurate mitering
- Powder coated paint for a long-lasting, chip-resistant finish
- Left tilt, wide stance heavy-duty trunnion for stability and smooth blade positioning
- Arbor Diameter 5/8"
- Arbor Speed 4200 RPM
- Blade Diameter 10"
- Dust Collection Minimum CFM Required 350
- Dust Port Diameter 4" OD
- Maximum Depth of Cut 3"
- Maximum Depth of Cut at 45 Degrees 2-1/8"
- Maximum Diameter of Dado 8"
- Maximum Rip Left of Blade 12"
- Maximum Rip Right of Blade 50"
- Maximum Width of Dado 13/16"
- Motor Amps 14.5
- Motor Voltage 230V, prewired 230V
- Table Height 34"
- Table in Front of Saw Blade at Maximum Depth of Cut 12"
- Table Size with Standard Extension 27"L x 40"W
- Table Size without Extension 27"L x 20"W
Shipping weight 540 lb. Shipped by common carrier at our regular shipping & handling rate plus $125 for excess weight. Freight items will be brought to the back of the delivery truck for you to unload. Please select appropriate delivery option. See 'Ships Direct from Manufacturer' link for warranty and return details.
California Residents: Click here for Proposition 65 information.
 Choosing a Table Saw - The central tool in almost all cabinetmaking shops is the table saw, probably the most useful single tool the average woodworker is going to have, because the work it does serves as a base for all that comes afterward. |
| |
|