Tired of using a tool rest that's too short, too soft and designed by an engineer that has no idea what it's like to even use a lathe? If you'd like to spend more time turning instead of tuning, the Woodcraft Lathe Tool Rest System is for you.
- Our straight “L” shaped rest improves tool control by allowing interference-free hand movement over the full length of the rest.
- The top of the rest features a hardened 1/4" steel rod, which will remain nick free, even after hours of use.
- The solid steel bowl rests provide a stable curve for turning and a flat top for vibration free scraping.
- Use the small bowl rest for bowls up to 7" in diameter and the large for up to approximately 14".
- The "S" bowl rest is 14" long with a 5" D bend on one end and an 8" D bend on the other.
- Woodcraft tool rests are modular in design, to save you money (buy 2 rests and 1 post), and permit you to use your rests on more than one lathe.
- Select the proper diameter post for your lathe and a tool rest in a length or shape to meet your needs. Note: Tool rest lengths include threads.
- Posts screw into rests and can easily be removed and attached to a different accessory.
California Residents: Click
here for Proposition 65 information.